Switching CAT 9300

1

hello,
someone got this error before?

%ETC-5-CANNOT_BUNDLE2: Te1/1/1 is not compatible with Po1 and will be suspended (vlan mask is different)

everything is well configured

interface TenGigabitEthernet1/1/1
switchport trunk allowed vlan 32,60
switchport mode trunk
channel-group 1 mode active

Cat 9300

1 Like
2

fixed the issue, reset both interface and add back the config

1 Like
3

When configured any sort of EC, I have always found it best to A: Default the Interfaces, B: Shut all interfaces down, configure them, and then bring them up.

1 Like